RichAssertions, Loops, N-ary Functions

Set Implicit Arguments.
From SLF Require Import LibSepReference LibSepTLCbuffer.
From SLF Require Basic Repr.

Implicit Types P : Prop.
Implicit Types H : hprop.
Implicit Types Q : valhprop.
Implicit Type p q : loc.
Implicit Type k : nat.
Implicit Type i n : int.
Implicit Type v : val.
Implicit Types b : bool.
Implicit Types L : list val.

First Pass

This chapter introduces support for additional language constructs:
  • assertions,
  • if-statements that are not in A-normal form (needed for loops)
  • while-loops,
  • n-ary functions (bonus contents).
Regarding assertions, we present a reasoning rule such that:
  • assertions may be expressed in terms of mutable data, and possibly to perform local side-effects, and
  • the program remains correct whether assertions are executed or not.
Regarding loops, we explain why traditional Hoare-style reasoning rules based on loop invariants are limited, in that they prevent useful applications of the frame rule. We present alternative reasoning rules compatible with the frame rule, and demonstrate their benefits on practical examples.
Regarding n-ary functions, that is, functions with several arguments, there are essentially three possible approaches:
  • native n-ary functions, e.g., function(x, y) { t } in C syntax;
  • curried functions, e.g., fun x fun y t in OCaml syntax;
  • tupled functions, e.g., fun (x,y) t in OCaml syntax.
In this chapter, we describe the first two approaches. The third approach (tupled functions) involves algebraic data types, which are beyond the scope of this course.

Reasoning Rule for Assertions

Module Assertions.
Assume an additional primitive operation, allowing to write terms of the form val_assert t, to dynamically check at runtime that the term t produces the boolean value true, equivalently to the OCaml expression assert(t).
Parameter val_assert : prim.
The reasoning rule for assertions should ensure that:
  • the body of the assertion always evaluates to true,
  • the program remains correct if the assertion is not evaluated.
Let us introduce a boolean flag to control the evaluation of assertions. The value of this flag is purposely left unspecified.
Parameter evaluate_assertions : bool.
The program should be correct for both possible values of evaluate_assertions. The semantics of the evaluation of assertions is formally captured by the following two rules.
  • The rule eval_assert_enabled applies when evaluate_assertions is set to true. The rule describes the evaluation of the body of the assertion, and the check that the output value is true.
  • The rule eval_assert_disabled applies when evaluate_assertions is set to false. The rule totally ignores the body of the assertion. It treats the assertion as immediately returning the unit value, in the current state.
Parameter eval_assert_enabled : s t s',
  evaluate_assertions = true
  eval s t s' (val_bool true) →
  eval s (val_assert t) s' val_unit.

Parameter eval_assert_disabled : s t,
  evaluate_assertions = false
  eval s (val_assert t) s val_unit.
Note that it might be tempting to consider a "unifying" evaluation rule that evaluates the body of the assertion, checks that the result is true, and, moreover, imposes that the assertion does not modify the state.
Parameter eval_assert_no_effect : s t v,
  eval s t s (val_bool true) →
  eval s (val_assert t) s val_unit.
Yet, such a rule would be overly restrictive, for two reasons. First, it might be useful for an assertion to allocate local data for evaluating a particular property. Second, there are useful examples of assertions that do modify existing cells from the heap. For example, an assertion that appears in real programs is assert (find x = find y), where the find operation finds the representative of a node from a Union-Find data structure, an operation that performs path compression.
At this point, our goal is to state a reasoning rule for val_assert t that does not depend on the value of the boolean flag evaluate_assertions. In other words, we are seeking for a rule that is correct both with respect to eval_assert_enabled and with respect to eval_assert_disabled.
Consider the evaluation of val_assert t in a state described by H. The output state should still be described by H, although the internal representation of the state might have changed (e.g., for path compression in the case of a Union-Find data structure). The body of the assertion should evaluate correctly in a state described by H, and should return the value true, in an output state still described by H.
As usual for primitive operations, we first establish a rule for Hoare triples, then deduce a rule for Separation Logic triples.
Lemma hoare_assert : t H,
  hoare t H (fun r\[r = true] \* H) →
  hoare (val_assert t) H (fun _H).
Proof using.
  introv M. intros s K. forwards (s'&v&R&N): M K.
  rewrite hstar_hpure_l in N. destruct N as (->&K').
  (* There are two cases, depending on whether assertions are evaluated. *)
  case_eq evaluate_assertions; intros C.
  (* Case 1: assertions are enabled. *)
  { s' val_unit. split.
    { applys eval_assert_enabled C R. }
    { applys K'. } }
  (* Case 2: assertions are disabled. *)
  { s val_unit. split.
    { applys eval_assert_disabled C. }
    { applys K. } }

Lemma triple_assert : t H,
  triple t H (fun r\[r = true] \* H) →
  triple (val_assert t) H (fun _H).
Proof using.
  introv M. intros H'. specializes M H'. applys hoare_assert.
  applys hoare_conseq M. { xsimpl. } { xsimpl. auto. }

End Assertions.

Semantics of Conditionals not in Administrative Normal Form

To state reasoning rule for while-loops in a concise manner, it is useful to generalize the construct if b then t1 else t2 to the form if t0 then t1 else t2.
To specify the behavior of a term of the form if t0 then t1 else t2, let us assume the evaluation rule shown below. This rule generalizes the rule eval_if. It first evaluates t0 into a value v0, then it evaluates the term if v0 then t1 else t2.
Parameter eval_if_trm : s1 s2 s3 v0 v t0 t1 t2,
  eval s1 t0 s2 v0
  eval s2 (trm_if v0 t1 t2) s3 v
  eval s1 (trm_if t0 t1 t2) s3 v.
With respect to this evaluation rule eval_if_trm, we can prove a correpsonding reasoning rule. We first state it in Hoare-logic, then in Separation Logic, following the usual proof pattern.
Lemma hoare_if_trm : Q' t0 t1 t2 H Q,
  hoare t0 H Q'
  ( v, hoare (trm_if v t1 t2) (Q' v) Q) →
  hoare (trm_if t0 t1 t2) H Q.
Proof using.
  introv M1 M2. intros s1 K1. lets (s2&v0&R2&K2): M1 K1.
  forwards (s3&v&R3&K3): M2 K2. s3 v. splits.
  { applys eval_if_trm R2 R3. }
  { applys K3. }

Lemma triple_if_trm : Q' t0 t1 t2 H Q,
  triple t0 H Q'
  ( v, triple (trm_if v t1 t2) (Q' v) Q) →
  triple (trm_if t0 t1 t2) H Q.
Proof using.
  introv M1 M2. intros HF. applys hoare_if_trm (Q' \*+ HF).
  { applys hoare_conseq. applys M1 HF. { xsimpl. } { xsimpl. } }
  { intros v. applys M2. }
The reasoning rule can also be reformulated in weakest-precondition form. The rule below generalizes the rule wp_if.
Lemma wp_if_trm : t0 t1 t2 Q,
  wp t0 (fun vwp (trm_if v t1 t2) Q) ==> wp (trm_if t0 t1 t2) Q.
Proof using.
  intros. unfold wp. xsimpl; intros H M H'. applys hoare_if_trm.
  { applys M. }
  { intros v. simpl. rewrite hstar_hexists. applys hoare_hexists. intros HF.
    rewrite (hstar_comm HF). rewrite hstar_assoc. applys hoare_hpure.
    intros N. applys N. }

Semantics and Basic Evaluation Rules for While-Loops

Module WhileLoops.
Assume the grammar of term to be extended with a loop construct trm_while t1 t2, corresponding to the OCaml expression while t1 do t2, and written While t1 Do t2 Done in our example programs.
Parameter trm_while : trmtrmtrm.

Notation "'while' t1 'do' t2 'done'" :=
  (trm_while t1 t2)
  (in custom trm at level 0,
   t1 custom trm at level 99,
   t2 custom trm at level 99,
   format "'[v' 'while' t1 'do' '/' '[' t2 ']' '/' 'done' ']'")
   : trm_scope.
The semantics of this loop construct can be described in terms of the one-step unfolding of the loop: while t1 do t2 is a term that behaves exactly like the term if t1 then (t2; while t1 do t2) else ().
Parameter eval_while : s1 s2 t1 t2 v,
  eval s1 (trm_if t1 (trm_seq t2 (trm_while t1 t2)) val_unit) s2 v
  eval s1 (trm_while t1 t2) s2 v.
This evaluation rule translates directly into a reasoning rule: to prove a triple for the term while t1 do t2, it suffices to prove a triple for the term if t1 then (t2; while t1 do t2) else ().
There is a catch in that reasoning principle, namely the fact that the loop while t1 do t2 appears again inside the term if t1 then (t2; while t1 do t2) else (). Nevertheless, this is not a problem if the user is carrying out a proof by induction. In that case, an induction hypothesis about the behavior of while t1 do t2 is available. We show an example proof further on.
For the moment, let us state the reasoning rules.
Lemma hoare_while : t1 t2 H Q,
  hoare (trm_if t1 (trm_seq t2 (trm_while t1 t2)) val_unit) H Q
  hoare (trm_while t1 t2) H Q.
Proof using.
  introv M K. forwards* (s'&v&R1&K1): M.
   s' v. splits*. { applys* eval_while. }

Lemma triple_while : t1 t2 H Q,
  triple (trm_if t1 (trm_seq t2 (trm_while t1 t2)) val_unit) H Q
  triple (trm_while t1 t2) H Q.
Proof using.
  introv M. intros H'. apply hoare_while. applys* M.

Lemma wp_while : t1 t2 Q,
      wp (trm_if t1 (trm_seq t2 (trm_while t1 t2)) val_unit) Q
  ==> wp (trm_while t1 t2) Q.
Proof using.
  intros. repeat unfold wp. xsimpl; intros H M H'.
  applys hoare_while. applys M.

Separation-Logic-friendly Reasoning Rule for While-Loops

One may be tempted to introduce an invariant-based reasoning rule for while loops. Traditional invariant-based rules from Hoare logic usually admit a relatively simple statement, because they only target partial correctness, and because the termination condition is restricted to a simple expression that does not alter the state.
In our set up, targeting total correctness and a construct of the form trm_while t1 t2, the invariant-based reasoning rule can be stated as shown below.
An invariant I describes the state at the entry and exit point of the loop. This invariant is actually of the form I b X, where the boolean value b is false to indicate that the loop has terminated, and where the value X belongs to a type A used to express the decreasing measure that justifies the termination of the loop.
Lemma triple_while_inv_not_framable :
   (A:Type) (I:boolAhprop) (R:AAProp) t1 t2,
  wf R
  ( b X, triple t1 (I b X) (fun r\ b', \[r = b'] \* I b' X)) →
  ( b X, triple t2 (I b X) (fun _\ b' Y, \[R Y X] \* I b' Y)) →
  triple (trm_while t1 t2) (\ b X, I b X) (fun r\ Y, I false Y).
Proof using.
  introv WR M1 M2. applys triple_hexists. intros b.
  applys triple_hexists. intros X.
  gen b. induction_wf IH: WR X. intros. applys triple_while.
  applys triple_if_trm (fun (r:val) ⇒ \ b', \[r = b'] \* I b' X).
  { applys M1. }
  { intros v. applys triple_hexists. intros b'. applys triple_hpure. intros →.
    applys triple_if. case_if.
    { applys triple_seq.
      { applys M2. }
      { applys triple_hexists. intros b''. applys triple_hexists. intros Y.
        applys triple_hpure. intros HR. applys IH HR. } }
    { applys triple_val. xsimpl. } }
The above rule is correct yet limited, because it precludes the possibility to apply the frame rule "over the remaining iterations of the loop".
This possibility can be exploited by carrying a proof by induction and invoking the rule triple_while, which unfolds the loop body. In that scheme, the frame rule can be applied to the term while t1 do t2 that occurs in the if t1 then (t2; (while t1 do t2)) else ().
We can reduce the noise associated with applying the rule triple_while by assigning a name, say t, to denote the term while t1 do t2. The correpsonding rule, shown below, asserts that t admits the same behavior as the term if t1 then (t2; t) else ().
Lemma triple_while' : t1 t2 H Q,
  ( t,
     ( H' Q', triple (trm_if t1 (trm_seq t2 t) val_unit) H' Q'
                    triple t H' Q') →
    triple t H Q) →
  triple (trm_while t1 t2) H Q.
Proof using.
  introv M. applys M. introv K. applys triple_while. applys K.
The proof scheme that consists of setting up an induction then applying the reasoning rule triple_while' can be factored into the following lemma, which is stated using an invariant that appears only in the precondition. The postcondition is an abstract Q. With this presentation, the rule features an "invariant", yet it remains possible to invoke the frame rule over the "remaining iterations" of the loop.
Lemma triple_while_inv :
   (A:Type) (I:boolAhprop) (R:AAProp) t1 t2,
  let Q := (fun r\ Y, I false Y) in
  wf R
  ( t b X,
    ( b' Y, R Y Xtriple t (I b' Y) Q) →
    triple (trm_if t1 (trm_seq t2 t) val_unit) (I b X) Q) →
  triple (trm_while t1 t2) (\ b X, I b X) Q.
Proof using.
  introv WR M. applys triple_hexists. intros b0.
  applys triple_hexists. intros X0.
  gen b0. induction_wf IH: WR X0. intros. applys triple_while.
  applys M. intros b' Y HR'. applys IH HR'.
The rule triple_while_inv admits a constrained precondition of the form (\ b X, I b X). To exploit this rule, one almost always needs to first invoke the consequence-frame rule.
The rule triple_while_inv_conseq_frame, shown below, conveniently bakes in frame and consequence rules into the statement of triple_while_inv.
Lemma triple_while_inv_conseq_frame :
   (A:Type) (I:boolAhprop) (R:AAProp) H' t1 t2 H Q,
  let Q' := (fun r\ Y, I false Y) in
  wf R
  (H ==> (\ b X, I b X) \* H') →
  ( t b X,
      ( b' Y, R Y Xtriple t (I b' Y) Q') →
      triple (trm_if t1 (trm_seq t2 t) val_unit) (I b X) Q') →
  Q' \*+ H' ===> Q
  triple (trm_while t1 t2) H Q.
Proof using.
  introv WR WH M WQ. applys triple_conseq_frame WH WQ.
  applys triple_while_inv WR M.
The above rule can be equivalently reformulated in weakest-precondition style.
Lemma wp_while_inv_conseq :
   (A:Type) (I:boolAhprop) (R:AAProp) t1 t2,
  let Q := (fun r\ Y, I false Y) in
  wf R
     (\ b X, I b X)
  \* \[ t b X,
      ( b' Y, R Y X → (I b' Y) ==> wp t Q) →
       (I b X) ==> wp (trm_if t1 (trm_seq t2 t) val_unit) Q]
   ==> wp (trm_while t1 t2) Q.
Proof using.
  introv WR. sets H: (\ b X, I b X). xpull. intros M.
  rewrite wp_equiv. applys triple_while_inv WR.
  introv N. rewrite <- wp_equiv. applys M.
  introv HR. rewrite wp_equiv. applys N HR.

More Details

Semantics and Basic Evaluation Rules for For-Loops

Module ForLoops.
In the previous section, we have focused on while loops and presented encodings, evaluation rules, and reasoning rules. In this section, we present a similar construction for for-loops.
A for loop takes the form trm_for x n1 n2 t3, matching the OCaml syntax for x = n1 to n2 do t3 done. We assume the bounds n1 and n2 to be already evaluated to integers---i.e., we assume A-normal form.
Parameter trm_for : vartrmtrmtrmtrm.

Notation "'for' x '=' t1 'to' t2 'do' t3 'done'" :=
  (trm_for x t1 t2 t3)
  (in custom trm at level 0,
   x at level 0,
   t1 custom trm at level 99,
   t2 custom trm at level 99,
   t3 custom trm at level 99,
   format "'[v' 'for' x '=' t1 'to' t2 'do' '/' '[' t3 ']' '/' 'done' ']'")
   : trm_scope.

Close Scope trm_scope.
The semantics of for x = n1 to n2 do t3 is encoded using a conditional. If n1 n2, then we execute the body t3 with x bound to n1 (that is, subst x n1 t3), and continue with the remainig iterations, which are described by for x = n1+1 to n2 do t3 done. Eventually, we reach a situation where n1 > n2. At this point, the loop terminates, and returns the unit value.
Parameter eval_for : s1 s2 x n1 n2 t3 v,
  eval s1 (trm_if (val_le n1 n2) (trm_seq (trm_let x n1 t3)
            (trm_for x (n1+1) n2 t3)) val_unit) s2 v
  eval s1 (trm_for x n1 n2 t3) s2 v.
The direct reasoning rules for for-loops w.r.t. Hoare triples and Separation Logic triples simply unfold the encoding.
Lemma hoare_for : x n1 n2 t3 H Q,
  hoare (trm_if (val_le n1 n2) (trm_seq (trm_let x n1 t3)
            (trm_for x (n1+1) n2 t3)) val_unit) H Q
  hoare (trm_for x n1 n2 t3) H Q.
Proof using.
  introv M K. forwards* (s'&v&R1&K1): M.
   s' v. splits*. { applys* eval_for. }

Lemma triple_for : x n1 n2 t3 H Q,
  triple (trm_if (val_le n1 n2) (trm_seq (trm_let x n1 t3)
            (trm_for x (n1+1) n2 t3)) val_unit) H Q
  triple (trm_for x n1 n2 t3) H Q.
Proof using. introv M. intros H'. apply hoare_for. applys* M. Qed.
Just like for while loops, we can reduce the noise associated with applying the rule triple_for, by pre-processing the encoding based on the conditional. This rule may be useful for carrying out proofs by induction.
Follow carefully through the proof, as it exhibits reasoning patterns that are useful for the follow-up exercises.
Lemma triple_for' : x n1 n2 t3 H Q,
  ( (tloop:inttrm) (i:int),
     ( i H' Q',
        (If in2
           then ( H1, triple (subst x i t3) H' (fun vH1)
                         ∧ triple (tloop (i+1)) H1 Q')
           else (H' ==> Q' val_unit)) →
        triple (tloop i) H' Q') →
    triple (tloop i) H Q) →
  triple (trm_for x n1 n2 t3) H Q.
Proof using.
  introv M. applys M (fun itrm_for x i n2 t3). introv K.
  applys triple_for. applys triple_if_trm.
  { applys triple_conseq_frame triple_le. xsimpl. xsimpl. }
  { intros v. applys triple_hpure. intros →. applys triple_if.
    do 2 case_if; try solve [ false; math ].
    { forwards (H1&K1&K2):K. applys triple_seq H1.
      { applys triple_let_val. applys K1. }
      { applys K2. } }
    { applys triple_val. applys K. } }
We can derive a simpler rule for the case of loops with no iterations.

Exercise: 4 stars, standard, optional (triple_for_ge)

Prove the specification of for loops in the case where the lower bound of the loop exceeds the upper bound of the loop. Hint: the proof shares similarities with that of triple_for'.
Lemma triple_for_ge : x n1 n2 t3 H Q,
  n1 > n2
  H ==> Q val_unit
  triple (trm_for x n1 n2 t3) H Q.
Proof using. (* FILL IN HERE *) Admitted.
We can derive an reasoning rule expressed using a loop invariant: if I n1 holds before the loop, and each iteration takes the state from I i to I (i+1), then I (n2+1) holds after the last iteration. The benefits of this presentation, compared with triple_for', is that it bakes in the application of the induction principle.

Exercise: 5 stars, standard, especially useful (triple_for_inv_conseq_frame)

Prove the invariant-based reasoning rule for for-loops. Hint: the proof shares similarities with that of triple_for'.
Lemma triple_for_inv_conseq_frame : (I:inthprop) H' x n1 n2 t3 H Q,
  n1n2+1 →
  (H ==> I n1 \* H') →
  ( i, n1in2+1 →
     triple (subst x i t3) (I i) (fun uI (i+1))) →
  (fun vI (n2+1) \* H') ===> Q
  triple (trm_for x n1 n2 t3) H Q.
Proof using. (* FILL IN HERE *) Admitted.
End ForLoops.

Treatment of Generalized Conditionals and Loops in wpgen

Close Scope wp_scope.
The formula generator wpgen may be extended to take into account the generalized form if t0 then t1 else t2. The corresponding formula is wpgen_let (aux t0) (fun v mkstruct (wpgen_if v (aux t1) (aux t2)), where wpgen_let is used to compute the wpgen of the argument of the conditional, and where wpgen_if is used to compute the wpgen of a conditional with a argument already evaluated to a value.
This pattern is captured by the auxiliary definition wpgen_if_trm.
    Fixpoint wpgen (E:ctx) (t:trm) : hprop :=
      mkstruct match t with
      | trm_if t0 t1 t2wpgen_if_trm (wpgen t0) (wpgen t1) (wpgen t2)
where wpgen_if_trm is defined as shown below.
Definition wpgen_if_trm (F0 F1 F2:formula) : formula :=
  wpgen_let F0 (fun vmkstruct (wpgen_if v F1 F2)).
The soundness of this extension of wpgen is captured by the following lemma.
Lemma wpgen_if_trm_sound : F0 F1 F2 t0 t1 t2,
  formula_sound t0 F0
  formula_sound t1 F1
  formula_sound t2 F2
  formula_sound (trm_if t0 t1 t2) (wpgen_if_trm F0 F1 F2).
Proof using.
  introv S0 S1 S2. unfold wpgen_if_trm. intros Q. unfold wpgen_let.
  applys himpl_trans S0. applys himpl_trans; [ | applys wp_if_trm ].
  applys wp_conseq. intros v. applys mkstruct_sound.
  intros Q'. applys wpgen_if_sound S1 S2.
To handle while loops in wpgen, we introduce the auxiliary definition wpgen_while.
    Fixpoint wpgen (E:ctx) (t:trm) : hprop :=
      mkstruct match t with
      | trm_while t1 t2wpgen_while (wpgen t1) (wpgen t2)
The definition of wpgen_while quantifies over an abstract formula F, while denotes the behavior of the while loop. The weakest precondition for the loop w.r.t. postcondition Q is described as F Q, or, more precisely mkstruct F Q, to keep track of the fact that F denotes a formula on which one may apply any structural reasoning rule.
To establish that mkstruct F Q is entailed by the heap predicate that describes the current state, the user is provided with an assumption: the fact that mkstruct F Q' can be proved from the weakest precondition of the term if t1 then (t2; t3) else (), where the weakest precondition of t3, which denotes the recursive call to the loop, is described by F.
Definition wpgen_while (F1 F2:formula) : formula := fun Q
  \ F,
     \[ Q', mkstruct (wpgen_if_trm F1
                                  (mkstruct (wpgen_seq F2 (mkstruct F)))
                                  (mkstruct (wpgen_val val_unit))) Q'
                  ==> mkstruct F Q']
  \−∗ (mkstruct F Q).
Let us axiomatize the fact that wpgen is generalized to handle the new term construct trm_while t1 t2.
Parameter wpgen_while_eq : E t1 t2,
  wpgen E (trm_while t1 t2) = mkstruct (wpgen_while (wpgen E t1) (wpgen E t2)).
The soundness proof of wpgen with respect to the treatment of while-loops goes as follows.
Lemma wpgen_while_sound : t1 t2 F1 F2,
  formula_sound t1 F1
  formula_sound t2 F2
  formula_sound (trm_while t1 t2) (wpgen_while F1 F2).
Proof using.
  introv S1 S2. intros Q. unfolds wpgen_while.
  applys himpl_hforall_l (wp (trm_while t1 t2)).
  applys himpl_trans. 2:{ rewrite* <- mkstruct_wp. }
  rewrite hwand_hpure_l. { auto. } intros Q'.
  applys mkstruct_monotone. intros Q''.
  applys himpl_trans. 2:{ applys wp_while. }
  applys himpl_trans.
  2:{ applys wpgen_if_trm_sound.
    { applys S1. }
    { applys mkstruct_sound. applys wpgen_seq_sound.
      { applys S2. }
      { applys mkstruct_sound. applys wp_sound. } }
    { applys mkstruct_sound. applys wpgen_val_sound. } }
  { auto. }

Notation and Tactics for Manipulating While-Loops

The associated piece of notation for displaying characteristic formulae are defined as follows.
Notation "'If_trm' F0 'Then' F1 'Else' F2" :=
  ((wpgen_if_trm F0 F1 F2))
  (in custom wp at level 69) : wp_scope.

Declare Scope wpgen_scope.

Notation "'While' F1 'Do' F2 'Done'" :=
  ((wpgen_while F1 F2))
  (in custom wp at level 69, F2 at level 68,
   format "'[v' 'While' F1 'Do' '/' '[' F2 ']' '/' 'Done' ']'")
   : wp_scope.
The tactic xapply is useful for applying an assumption of the form H ==> mkstruct F Q to a goal of the form H' ==> mkstruct F Q', with the ramified frame rule relating H, H', Q and Q'. In essence, xapply applies an hypothesis "modulo consequence-frame".
Lemma mkstruct_apply : H1 H2 F Q1 Q2,
  H1 ==> mkstruct F Q1
  H2 ==> H1 \* (Q1 \−−∗ protect Q2) →
  H2 ==> mkstruct F Q2.
Proof using.
  introv M1 M2. xchange M2. xchange M1. applys mkstruct_ramified.

Tactic Notation "xapply" constr(E) :=
  applys mkstruct_apply; [ applys E | xsimpl; unfold protect ].
The tactic xwhile is useful for reasoning about a while-loop. In essence, the tactic while applies the reasoning rule wp_while.
Lemma xwhile_lemma : F1 F2 H Q,
  ( F,
    ( Q', mkstruct (wpgen_if_trm F1 (mkstruct (wpgen_seq F2 (mkstruct F)))
                                          (mkstruct (wpgen_val val_unit))) Q'
                ==> mkstruct F Q')
     → H ==> mkstruct F Q) →
  H ==> mkstruct (wpgen_while F1 F2) Q.
Proof using.
  introv M. applys himpl_trans. 2:{ applys mkstruct_erase. }
  unfold wpgen_while. xsimpl. intros F N. applys M. applys N.

Tactic Notation "xwhile" :=
  xseq_xlet_if_needed; applys xwhile_lemma.
Note: a similar construction could be set up for dealing with for loops.

Example of the Application of Frame During Loop Iterations

Section DemoLoopFrame.
Import ProgramSyntax Basic Repr.
Global Opaque MList.
Consider the following function, which computes the length of a linked list with head at location p, using a while loop and a reference named a to count the number of cells being traversed.
    let mlength_loop p =
      let a = ref 0 in
      let r = ref p in
      while !r != null do
        incr a;
        r := !p.tail;
      let n = !a in
      free a;
      free r;
Definition mlength_loop : val :=
  <{ fun 'p
       let 'a = ref 0 in
       let 'r = ref 'p in
       while let 'p1 = !'r in ('p1null) do
         incr 'a;
         let 'p1 = !'r in
         let 'q = 'p1`.tail in
         'r := 'q
       let 'n = !'a in
       free 'a;
       free 'r;
       'n }>.
This function is specified and verified as follows.
Lemma triple_mlength_loop : L p,
  triple (mlength_loop p)
    (MList L p)
    (fun r\[r = length L] \* MList L p).
Proof using.
Let's compute the weakest precondition and pretend that xwpgen includes support for loops.
  xwp. xapp. intros a. xapp. intros r.
  rewrite wpgen_while_eq. xwp_simpl.
We call the xwhile tactic to handle the loop. The formula F then denotes "the behavior of the loop".
  xwhile. intros F HF.
We next state the induction principle for the loop, in the form I p n ==> F Q, where I p n denotes the loop invariant, and Q describes the final output of the loop.
  asserts KF: ( p n,
         r ~~> p \* a ~~> n \* MList L p
     ==> mkstruct F (fun _r ~~> null \* a ~~> (length L + n) \* MList L p)).
We carry out a proof by induction on the length of the list L.
  { induction_wf IH: list_sub L. intros.
    applys himpl_trans HF. clear HF. xlet.
    xapp. xapp. xchange MList_if. xif; intros C; case_if.
    { xpull. intros x q L' →. xseq. xapp. xapp. xapp. xapp.
At this point, we reason about the recursive call. We use the tactic xapply to apply the induction hypothesis modulo the frame rule. Here, the head cell of the list is framed out over the scope of the recursive call, which operates only on the tail of the list.
      xapply (IH L'). { auto. } intros _.
      xchange <- MList_cons. { xsimpl. rew_list. math. } }
    { xpull. intros →. xval. xsimpl. { congruence. }
      subst. xchange* <- (MList_nil null). } }
  xapply KF. xpull. xapp. xapp. xapp. xval. xsimpl. math.

End DemoLoopFrame.

Reasoning Rule for Loops in an Affine Logic

Module LoopRuleAffine.
Recall from Affine the combined structural rule that includes the affine top predicate \GC.
Parameter triple_conseq_frame_hgc : H2 H1 Q1 t H Q,
  triple t H1 Q1
  H ==> H1 \* H2
  Q1 \*+ H2 ===> Q \*+ \GC
  triple t H Q.
In that setting, it is useful to integrate \GC into the rule triple_while_inv_conseq_frame, to allow discarding the data allocated by the loop iterations but not described in the final postcondition.
Lemma triple_while_inv_conseq_frame_hgc :
   (A:Type) (I:boolAhprop) (R:AAProp) H' t1 t2 H Q,
  let Q' := (fun r\ Y, I false Y) in
  wf R
  (H ==> (\ b X, I b X) \* H') →
  ( t b X,
      ( b' Y, R Y Xtriple t (I b' Y) Q') →
      triple (trm_if t1 (trm_seq t2 t) val_unit) (I b X) Q') →
  Q' \*+ H' ===> Q \*+ \GC
  triple (trm_while t1 t2) H Q.
Proof using.
  introv WR WH M WQ. applys triple_conseq_frame_hgc WH WQ.
  applys triple_while_inv WR M.

End LoopRuleAffine.

End WhileLoops.

Curried Functions of Several Arguments

Module CurriedFun.
Open Scope liblist_scope.
Implicit Types f : var.
We next give a quick presentation of the notation, lemmas and tactics involved in the manipulation of curried functions of several arguments.
We focus here on the particular case of recursive functions with 2 arguments, to illustrate the principles at play. Set up for non-recursive and recursive functions of arity 2 and 3 can be found in the file LibSepReference.
One may attempt to generalize these definitions to handle arbitrary arities. Yet, to obtain an arity-generic treatment of functions, it appears simpler to work with primitive n-ary functions, whose treatment is presented in the next section.
Consider a curried recursive functions that expects two arguments: val_fix f x1 (trm_fun x2 t) describes such a function, where f denotes the name of the function for recursive calls, x1 and x2 denote the arguments, and t denotes the body. Observe that the inner function, the one that expects x2, is not recursive, and that it is not a value but a term (because it may refer to the variable x1 bound outside of it).
We introduce the notation Fix f x1 x2 := t for such a recursive function with two arguments.
Notation "'Fix' f x1 x2 ':=' t" :=
  (val_fix f x1 (trm_fun x2 t))
  (at level 69, f, x1, x2 at level 0,
  format "'Fix' f x1 x2 ':=' t").
An application of a function with two arguments takes the form f v1 v2, which is actually parsed as trm_app (trm_app f v1) v2.
This expression is an application of a term to a value, and not of a value to a value. Thus, this expression cannot be evaluated using the rule eval_app_fun. We therefore need a distinct rule for first evaluating the arguments of a function application to values, before we can evaluate the application of a value to a value.
The rule eval_app_args serves that purpose. To state it, we first need to characterize whether a term is a value or not, using the predicate trm_is_val t defined next.
Definition trm_is_val (t:trm) : Prop :=
  match t with trm_val vTrue | _False end.
The statement of eval_app_args is as shown below. For an expression of the form trm_app t1 t2, where either t1 or t2 is not a value, it enables reducing both t1 and t2 to values, leaving a premise describing the evaluation of a term of the form trm_app v1 v2, for which the rule eval_app_fun applies.
Parameter eval_app_args : s1 s2 s3 s4 t1 t2 v1 v2 r,
  (~ trm_is_val t1 ∨ ¬trm_is_val t2) →
  eval s1 t1 s2 v1
  eval s2 t2 s3 v2
  eval s3 (trm_app v1 v2) s4 r
  eval s1 (trm_app t1 t2) s4 r.
Using the above rule, we can establish an evaluation rule for the term v0 v1 v2. There, v0 denotes a recursive function of two arguments named x1 and x2, the values v1 and v2 denote the two arguments, and f denotes the name of the function available for making recursive calls from the body t1.
The key idea is that the behavior of v0 v1 v2 is similar to that of the term subst x2 v2 (subst x1 v1 (subst f v0 t1)). We state this property using the predicate eval_like, introduced in the chapter Rules.
Lemma eval_like_app_fix2 : v0 v1 v2 f x1 x2 t1,
  v0 = val_fix f x1 (trm_fun x2 t1) →
  (x1x2fx2) →
  eval_like (subst x2 v2 (subst x1 v1 (subst f v0 t1))) (v0 v1 v2).
Proof using.
  introv E (N1&N2). introv R. applys* eval_app_args.
  { applys eval_app_fix E. simpl. do 2 (rewrite var_eq_spec; case_if).
    applys eval_fun. }
  { applys* eval_val. }
  { applys* eval_app_fun. }
We next derive the specification triple for applications of the form v0 v1 v2.
Lemma triple_app_fix2 : f x1 x2 v0 v1 v2 t1 H Q,
  v0 = val_fix f x1 (trm_fun x2 t1) →
  (x1x2fx2) →
  triple (subst x2 v2 (subst x1 v1 (subst f v0 t1))) H Q
  triple (v0 v1 v2) H Q.
Proof using.
  introv E N M1. applys triple_eval_like M1. applys* eval_like_app_fix2.
The reasoning rule above can be reformulated in weakest-precondition style.
Lemma wp_app_fix2 : f x1 x2 v0 v1 v2 t1 Q,
  v0 = val_fix f x1 (trm_fun x2 t1) →
  (x1x2fx2) →
  wp (subst x2 v2 (subst x1 v1 (subst f v0 t1))) Q ==> wp (trm_app v0 v1 v2) Q.
Proof using. introv EQ1 N. applys wp_eval_like. applys* eval_like_app_fix2. Qed.
Finally, it is useful to extend the tactic xwp, so that it exploits the rule wp_app_fix2 in the same way as it exploits wp_app_fix.
To that end, we state a lemma featuring a conclusion expressed as a triple, and a premise expressed using wpgen. Observe the substitution context associated with wpgen: it is instantiated as (f,v0)::(x1,v1)::(x2,v2)::nil, so as to perform the relevant substitutions. Note also how the side-condition expressing the freshness conditions on the variables, using a comparison function for variables that computes in Coq.
Lemma xwp_lemma_fix2 : f v0 v1 v2 x1 x2 t H Q,
  v0 = val_fix f x1 (trm_fun x2 t) →
  (var_eq x1 x2 = falsevar_eq f x2 = false) →
  H ==> wpgen ((f,v0)::(x1,v1)::(x2,v2)::nil) t Q
  triple (v0 v1 v2) H Q.
Proof using.
  introv M1 N M2. repeat rewrite var_eq_spec in N. rew_bool_eq in *.
  rewrite <- wp_equiv. xchange M2.
  xchange (>> wpgen_sound
    (((f,v0)::nil) ++ ((x1,v1)::nil) ++ ((x2,v2)::nil)) t Q).
  do 2 rewrite isubst_app. do 3 rewrite <- subst_eq_isubst_one.
  applys* wp_app_fix2.
The lemma gets integrated into the implementation of xwp as follows.
Tactic Notation "xwp" :=
  first [ applys xwp_lemma_fun; [ reflexivity | ]
        | applys xwp_lemma_fix; [ reflexivity | ]
        | applys xwp_lemma_fix2; [ reflexivity | splits; reflexivity | ] ];
This tactic xwp also appears in the file LibSepReference.v. It is exploited in several examples from the chapter Basic.
End CurriedFun.

Primitive n-ary Functions

Module PrimitiveNaryFun.
We next present an alternative treatment to functions of several arguments. The idea is to represent function arguments using lists. The verification tool CFML is implemented following this approach.
On the one hand, the manipulation of lists adds a little bit of boilerplate. On the other hand, when using this representation, all the definitions and lemmas are inherently arity-generic, that is, they work for any number of arguments.
We introduce the short names vars, vals and trms to denote lists of variables, lists of values, and lists of terms, respectively.
These names are not only useful to improve conciseness, they also enable the set up of useful coercions, as illustrated further on.
Definition vars : Type := list var.
Definition vals : Type := list val.
Definition trms : Type := list trm.

Implicit Types xs : vars.
Implicit Types vs : vals.
Implicit Types ts : trms.
We assume the grammar of terms and values to include primitive n-ary functions and primitive n-ary applications, featuring list of arguments.
Thereafter, for conciseness, we focus on the treatment of recursive functions, and do not describe the simpler case of non-recursive functions.
Parameter val_fixs : varvarstrmval.
Parameter trm_fixs : varvarstrmtrm.
Parameter trm_apps : trmtrmstrm.
The substitution function is a bit tricky to update for dealing with list of variables. A definition along the following lines computes well, and is recognized as structurally recursive by Coq.
    Fixpoint subst (y:var) (w:val) (t:trm) : trm :=
      let aux t := (subst y w t) in
      let aux_no_captures xs t := (If List.In y xs then t else aux t) in
      match t with
      | trm_fixs f xs t1trm_fixs f xs (If f = y then t1 else
                                            aux_no_captures xs t1)
      | trm_apps t0 tstrm_apps (aux t0) ( aux ts)
The evaluation rules also need to be updated to handle list of arguments. A n-ary function from the grammar of terms evaluates to the corresponding n-ary function from the grammar of values.
Parameter eval_fixs : m f xs t1,
  eval m (trm_fixs f xs t1) m (val_fixs f xs t1).
Note that, for technical reasons, we need to ensure that list of arguments is nonempty. Indeed, a function with zero arguments would beta-reduce to its body as soon as it is defined, because it is not waiting for any argument, resulting in an infinite sequence of reductions.
The application of a n-ary function to values takes the form trm_apps (trm_val v0) ((trm_val v1):: .. ::(trm_val vn)::nil).
If the function v0 is defined as val_fixs f xs t1, where xs denotes the list x1::x2::...::xn::nil, then the beta-reduction of the function application triggers the evaluation of the term subst xn vn (... (subst x1 v1 (subst f v0 t1)) ...).
To describe the evaluation rule in an arity-generic way, we need to introduce the list vs made of the values provided as arguments, that is, the list v1::v2::..::vn::nil.
With this list vs, the n-ary application can then be written as the term trm_apps (trm_val v0) (trms_vals vs), where the operation trms_vals converts a list of values into a list of terms by applying the constructor trm_val to every value from the list.
Coercion trms_vals (vs:vals) : trms := trm_val vs.
Note that we declare the operation trms_vals as a coercion, just like trm_val is a coercion. Doing so enables us to write a n-ary application in the form v0 vs.
To describe the iterated substitution subst xn vn (... (subst x1 v1 (subst f v0 t1)) ...), we introduce the operation substn xs vs t, which substitutes the variables xs with the values vs inside the t. It is defined recursively, by iterating calls to the function subst for substituting the variables one by one.
Fixpoint substn (xs:list var) (vs:list val) (t:trm) : trm :=
  match xs,vs with
  | x::xs', v::vs'substn xs' vs' (subst x v t)
  | _,_t
This substitution operation is well-behaved only if the list xs and the list vs have the same lengths. It is also needed for reasoning about the evaluation rule to guarantee that the list of variables xs contains variables that are distinct from each others and distinct from f, and to guarantee that the list xs is not empty.
To formally capture all these invariants, we introduce the predicate var_fixs f xs n, where n denotes the number of arguments the function is being applied to. Typically, n is equal to the length of the list of arguments vs).
Definition var_fixs (f:var) (xs:vars) (n:nat) : Prop :=
     LibList.noduplicates (f::xs)
  ∧ length xs = n
  ∧ xsnil.
The evaluation of a recursive function v0 defined as val_fixs f xs t1 on a list of arguments vs triggers the evaluation of the term substn xs vs (subst f v0 t1), same as substn (f::xs) (v0::vs) t1. The evaluation rule is stated as follows, using the predicate var_fixs to enforce the appropriate invariants on the variable names.
Parameter eval_apps_fixs : v0 vs f xs t1 s1 s2 r,
  v0 = val_fixs f xs t1
  var_fixs f xs (LibList.length vs) →
  eval s1 (substn (f::xs) (v0::vs) t1) s2 r
  eval s1 (trm_apps v0 (trms_vals vs)) s2 r.
The corresponding reasoning rule admits a somewhat similar statement.
Lemma triple_apps_fixs : v0 vs f xs t1 H Q,
  v0 = val_fixs f xs t1
  var_fixs f xs (LibList.length vs)->
  triple (substn (f::xs) (v0::vs) t1) H Q
  triple (trm_apps v0 vs) H Q.
Proof using.
  introv E N M. applys triple_eval_like M.
  introv R. applys* eval_apps_fixs.
The statement of the above lemma applies only to terms that are of the form trm_apps (trm_val v0) (trms_vals vs). Yet, in practice, goals are generally of the form trm_apps (trm_val v0) ((trm_val v1):: .. :: (trm_val vn)::nil).
The two forms are convertible. Yet, in most cases, Coq is not able to synthesize the list vs during the unification process.
Fortunately, it is possible to reformulate the lemma using an auxiliary conversion function named trms_to_vals, whose evaluation by Coq's unification process is able to synthesize the list vs.
The operation trms_to_vals ts, if all the terms in ts are of the form trm_val vi, returns a list of values vs such that ts is equal to trms_vals vs. Otherwise, the operation returns None. The definition and specification of the operation trms_to_vals are as follows.
Fixpoint trms_to_vals (ts:trms) : option vals :=
  match ts with
  | nilSome nil
  | (trm_val v)::ts'
      match trms_to_vals ts' with
      | NoneNone
      | Some vs'Some (v::vs')
  | _None
The specification of the function trms_to_vals asserts that if trms_to_vals ts produces some list of values vs, then ts is equal to trms_vals vs.
Lemma trms_to_vals_spec : ts vs,
  trms_to_vals ts = Some vs
  ts = trms_vals vs.
Proof using.
  intros ts. induction ts as [|t ts']; simpl; introv E.
  { inverts E. auto. }
  { destruct t; inverts E as E. cases (trms_to_vals ts') as C; inverts E.
    rename v0 into vs'. rewrite* (IHts' vs'). }
Here is a demo showing how trms_to_vals computes in practice.
Lemma demo_trms_to_vals : v1 v2 v3,
     trms_to_vals ((trm_val v1)::(trm_val v2)::(trm_val v3)::nil) = Some vs
  ∧ vs = vs.
Proof using.
  (* Activate the display of coercions to play this demo *)
  intros. esplit. split. simpl. eauto. (* Observe how vs is inferred. *)
Using trms_to_vals, we can reformulate the rule triple_apps_fixs in such a way that the rule can be smoothly applied on goals of the form trm_apps (trm_val v0) ((trm_val v1):: .. :: (trm_val vn)::nil).
Lemma triple_apps_fixs' : v0 ts vs f xs t1 H Q,
  v0 = val_fixs f xs t1
  trms_to_vals ts = Some vs
  var_fixs f xs (LibList.length vs)->
  triple (substn (f::xs) (v0::vs) t1) H Q
  triple (trm_apps v0 ts) H Q.
Proof using.
  introv E T N M. rewrites (@trms_to_vals_spec _ _ T).
  applys* triple_apps_fixs.
Finally, let us show how to integrate the rule triple_apps_fixs' into the tactic xwp. To that end, we reformulate the rule by making two small changes.
The first change consists of replacing the predicate var_fixs which checks the well-formedness properties of the list of variables xs by an executable version of this predicate, with a result in bool. This way, the tactic reflexivity can prove all the desired facts, when the lemma in invoked on a concrete function. We omit the details, and simply state the type of the boolean function var_fixs_exec.
Parameter var_fixs_exec : varvarsnatbool.
The second change consists of introducing the wpgen function for reasoning about the body of the function. Concretely, the substitution substn (f::xs) (v0::vs) is described by the substitution context List.combine (f::xs) (v0::vs).
The statement of the lemma for xwp is as follows. We omit the proof details. (They may be found in the implementation of the CFML tool.)
Parameter xwp_lemma_fixs : v0 ts vs f xs t1 H Q,
  v0 = val_fixs f xs t1
  trms_to_vals ts = Some vs
  var_fixs_exec f xs (LibList.length vs) →
  H ==> (wpgen (combine (f::xs) (v0::vs)) t1) Q
  triple (trm_apps v0 ts) H Q.

Optional Material

A Coercion for Parsing Primitive N-ary Applications

One last practical detail for working with primitive n-ary functions in a smooth way consists of improving the parsing of applications.
Writing an application in the form trm_apps f (x::y::nil) to denote teh application of a function f to two arguments x and y is fairly verbose, in comparison with the syntax f x y, which we were able to set up by declaring trm_app as a Funclass coercion---recall chapter Rules.
If we simply declare trm_apps as a Funclass coercion, then we can write f (x::y::nil) in place of trm_apps f (x::y::nil), however we still need to write the arguments in the form x::y::nil.
Fortunately, there is a trick that allows the expression f x y to be interpreted by Coq as trm_apps f (x::y::nil). This trick is arity-generic: it works for any number of arguments. It is described next.
Module NarySyntax.
To explain the working of our coercion trick, let us consider a simplified grammar of terms, including only the constructor trm_apps for n-ary applications, and the construct trm_val for values.
Inductive trm : Type :=
  | trm_val : valtrm
  | trm_apps : trmlist trmtrm.
We introduce the data type apps, featuring two constructors named apps_init and apps_next, to represent the syntax tree.
Inductive apps : Type :=
  | apps_init : trmtrmapps
  | apps_next : appstrmapps.
For example, the term trm_apps f (x::y::z::nil) is represented as the expression apps_next (apps_next (apps_init f x) y) z.
Internally, the parsing proceeds as follows.
  • The application of a term to a term, that is, t1 t2, gets interpreted via a Funclass coercion as apps_init t1 t2, which is an expression of type apps.
  • The application of an object of type apps to a term, that is a1 t2, gets interpreted via another Funclass coercion as apps_next a1 t2.
Coercion apps_init : trm >-> Funclass.
Coercion apps_next : apps >-> Funclass.
From a term of the form apps_next (apps_next (apps_init f x) y) z, the corresponding application trm_apps f (x::y::z::nil) can be computed by a Coq function, called apps_to_trm, that processes the syntax tree of the apps expression. This function is implemented recursively.
  • In the base case, apps_init t1 t2 describes the application of a function to one argument: trm_apps t1 (t2::nil).
  • In the "next" case, if an apps structure a1 describes a term trm_apps t0 ts, then apps_next a1 t2 describes the term trm_apps t0 (ts++t2::nil), that is, an application to one more argument.
Fixpoint apps_to_trm (a:apps) : trm :=
  match a with
  | apps_init t1 t2trm_apps t1 (t2::nil)
  | apps_next a1 t2
      match apps_to_trm a1 with
      | trm_apps t0 tstrm_apps t0 ( ts (t2::nil))
      | t0trm_apps t0 (t2::nil)
The function apps_to_trm is declared as a coercion from apps to trm, so that any iterated application can be interpreted as the corresponding trm_apps term. Coq raises an "ambiguous coercion path" warning, but this warning may be safely ignored here.
Coercion apps_to_trm : apps >-> trm.
The following demo shows how the term f x y z is parsed as apps_to_trm (apps_next (apps_next (apps_init f x) y) z), which then simplifies by simpl to trm_apps f (x::y::z::nil).
Lemma apps_demo : (f x y z:trm),
  (f x y z : trm) = trm_apps f (x::y::z::nil).
Proof using. intros. (* activate display of coercions *) simpl. Abort.

End NarySyntax.

End PrimitiveNaryFun.

Historical Notes

Regarding while loops, the possibility to frame over the remaining iterations, as illustrated with the example of triple_mlength_loop, is inherently available when a loop is encoded as a recursive functions, or when a loop is presented in CPS-style (typical with assembly-level code). The statement of a reasoning rule directly applicable to a non-encoded loop construct, and allowing to frame over the remaining iterations, has appeared independently in work by [Charguéraud 2010] and [Tuerk 2010].
(* 2021-01-25 13:28 *)